Evolution of internal solitary waves on the slope-shelf topography in the northern South China Sea     

Wang  Shuya  Meng  Jing  Li  Qun  Chen  Xu 《Ocean Dynamics》2020,70(6):729-743

Ocean Dynamics - Based on a non-hydrostatic two-dimensional and high-resolution model, evolution of internal solitary waves (ISWs) on the typical slope-shelf topography in the northern South China...  相似文献   

电感耦合等离子体质谱法测定花岗伟晶岩中锂、铍、铷、铯、铌和钽     

胡兰基  朱琳  赵玉卿  马龙  王洪桂  方宏树  何媛媛 《化工矿产地质》2020,42(4)

  相似文献   

Application of flocculation combined with vacuum preloading to reduce river-dredged sludge     

Feiyu Liu  Wenqing Wu  Jun Wang  Jun Hai  Yuanqiang Cai 《Marine Georesources & Geotechnology》2020,38(2):164-173

Abstract

To achieve the rapid dewatering of dredged sludge, the flocculation–vacuum-preloading method was tested indoors. In this study, the optimal mixing ratio of six flocculants was determined through the settling column test, and then the proposed method was tested. The water drainage and settlement were monitored during the test, while the soil moisture content and shear strength were measured after the test. The results show that all the flocculants had an optimal mixing ratio, and the addition of 0.8% FeCl₃ or 0.08% anionic polyacrylamide (APAM) in the sludge can better accelerate solid–liquid separation of the sludge. After the test, the water content in the sludge decreased from 140% to 60%. Compared with general vacuum preloading, the use of the proposed method increased the water drainage by 46.5% and 56.8% and decreased the soil volumes by 60.5% and 82.4% for FeCl₃ and APAM, respectively. Moreover, the corresponding shear strength was increased from 10 to 14 and 17?kPa. In addition, the use of APAM increased the solidification rate of heavy metals in the sludge to more than 80%, effectively inhibiting the migration of heavy metals.  相似文献   

深度学习在水声目标识别中的应用研究     

王培兵  彭圆 《数字海洋与水下攻防》2020,3(1):11-17

水声目标识别技术是水声信号处理的重要组成部分，是水声信息获取与水声信息对抗的重要技术支撑。针对水声目标识别时探测数据量大、自动化程度不高、识别效率低下等问题，研究了深度学习在水声目标识别中的应用。首先，介绍了水声目标识别技术的研究现状及当前形势下面临的挑战。然后，对深度学习的网络结构原理及改进型进行了分析，并分别对深度学习在水声声信号识别领域和水声图像信号识别领域的应用现状做了阐述。最后，指出了由于受当前技术条件和水下复杂环境的制约，此方法尚且存在着不足之处。该方法为进一步优化深度学习算法、拓展深度学习技术应用范畴、提升水声目标识别效率提供了参考。  相似文献   

一种无人艇自适应无线通信系统的设计应用     

卢筑飞  陈天利  王超 《数字海洋与水下攻防》2020,3(4):309-313

随着无人艇技术的发展成熟，各型无人艇已逐步应用到民用和军用领域。无线通信系统作为无人艇的重要组成部分，承担着无人艇与母艇之间信息交互的功能。从无线通信技术的发展现状出发，分析出适用于无人艇应用场景的无线通信技术及工程设计方法，并设计了一种自适应无线通信系统。该系统能根据无人艇工作状态提供连续稳定的数据链，经试验测试，运行效果良好。  相似文献   

基于COⅠ基因序列的长腹剑水蚤系统进化关系     

王兴霞  徐磊  王亮根  陈骁  郑媛媛  王雪辉  杜飞雁 《海洋学报》2018,40(6):92-103

长腹剑水蚤属（Oithona）是广泛分布于海洋近岸和外海海域的中小型桡足类中最为丰富的类群之一，由于个体小且形态差异微小，通过传统的形态学分类法对其进行准确鉴定难度较大。本文对南海分布的长腹剑水蚤属内的5个种，即瘦长腹剑水蚤（O.tenuis）、羽长腹剑水蚤（O.plumifera）、刺长腹剑水蚤（O.setigera）、伪长腹剑水蚤（O.fallax）和长刺长腹剑水蚤（O.longispina）线粒体COⅠ基因序列以及DNA数据库中长腹剑水蚤属其他地区种类COⅠ基因序列进行比较分析，使用ABGD （Automatic Barcode Gap Discovery）和GMYC （Generalized Mixed Yule Coalescent）模型进行物种界定，分析种间种内遗传距离，并构建系统进化关系。结果显示ABGD和GMYC模型均可以很好地对长腹剑水蚤进行种类划分；种内遗传距离为0.0%~1.6%，种间遗传距离为17.7%~44.5%（Kimura 2-parameter双参数模型），表明种间出现较高的分化；贝叶斯系统树和最大似然树进化树结果均表明，简长腹剑水蚤（O.simplex）与其他种类相距较远，羽长腹剑水蚤和拟长腹剑水蚤（O.similis）中存在隐种的分化，分别是我国南海海域和地中海的羽长腹剑水蚤以及朝鲜海峡和北海的拟长腹剑水蚤，种间遗传距离分别为18.6%、22.9%。  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

Bedrock erosion due to hoeing as tillage technique in a hilly agricultural landscape,southwest China     

Haichao Xu  Jianhui Zhang  Yuhang Wei  Jiadong Dai  Yong Wang 《地球表面变化过程与地形》2020,45(6):1418-1429

Tillage on hillslopes may not only induce severe soil erosion, but may also cause bedrock erosion under certain conditions. Yet, little is known about bedrock erosion by tillage in a hilly agricultural landscape, southwest China. The aim of this study is to quantify the translocation of rock fragments derived from bedrock fragmentation by hoeing under different conditions, including slope gradient, hoeing depth and soil-covered thickness using a gravel tracing method. The reliability of the gravel tracing method was confirmed by the bedrock dyeing tracing method. Hoeing depth is a significant factor affecting the translocation rate of rock fragments (Q_r ). Meanwhile, under the condition of overlying soil layers (0.06−0.10 m thick), the values of Q_r were significantly smaller with a reduction of 20.7−25.6%, compared with rock fragmentation by hoeing for bare bedrock. However, slope gradient was found to have insignificant effects on Q_r . Fractured bedrock moved as individual small fragments, which was mainly controlled by the hitting force of the hoe, while soil moved in the shape of lumps, which was dominated by both drag force of the hoe and gravity. This study suggests that hoeing into soil-covered bedrock can diminish bedrock erosion while providing soil matrix for shallow soil layers. Our work presents a quantitative assessment of bedrock erosion by hoeing and an underlying insight into characteristics of bedrock erosion by tillage operations in hilly agricultural regions with mudstone and shale, southwest China. © 2020 John Wiley & Sons, Ltd.  相似文献   

On the morphology of radial sand ridges     

Weina Zhang  Xiaohe Zhang  Huiming Huang  Yigang Wang  Sergio Fagherazzi 《地球表面变化过程与地形》2020,45(11):2613-2630

We use a hydrodynamic model applied to an idealized fan-shaped basin to explore the morphology and dynamics of radial sand ridges in a convergent coastal system. A positive morphological feedback between channel incision and flow redistribution is responsible for the formation of the channel-ridge pattern. The selection mechanism of bottom wavelength is associated with flow concentration in the deeper part of the channels. Our results are compared to sediment and hydraulic dynamics in the radial sand ridges (RSRs) in China. In a convergent, sloping basin the tangentially averaged tidal velocity peaks at 47 km from the apex. This distance is similar to the arc distance, 62 km, where the RSRs are most incised. An offshore shift in tidal phase results in stronger flows near the north coastline, explaining the presence of asymmetric channel patterns. A numerical stability analysis indicates that small radial oscillations with a wavelength of 10° to 15° maximize the velocity in the troughs. This oscillation wavelength also emerges in the RSRs, which display a peak in spectral energy at a radial wavelength between 25° to 37.5°. High-resolution numerical simulations in the RSRs confirm that flow concentration occurs in the deeper part of the channels, keeping them flushed. We therefore conclude that the RSRs display morphometric characteristics similar to other tidal incisions, like tidal inlets and intertidal channels. This result further supports the dominant role of tidal prism and related peak velocities in incising coastal landscapes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献